Remote Controlled External Digital Display and Load Control Indicator

Support Line

RIO-AC1

Remote Controlled External Digital Display and Load Control Indicator

The indicator device and load indicator are used to prevent lifting operations from continuing if the lifted load exceeds the crane capacity by issuing a warning. This helps prevent possible work accidents and material damages. Additionally, connection to external systems can be made through communication lines. The easy integration of the indicator panel and load indicator ensures quick installation. As it can be controlled remotely, access to the device is not required for parameter adjustment. Device parameters can be modified via CANOpen.

Technical Specifications

General Features

Control	Parameter setting with remote control
Sensor Input	Connection for 1 load cell
Relay	3 NO contact 10A relays
Relay Positions	Positions of all outputs can be adjusted
Operating and Storage Temperature	-20°C to +50°C
Display	6-digit 7-segment LED display panel
Digit Size	100 mm
Display Color	Standard red LED display
Reading Distance	Reading can be done from a distance of 50 m indoors

Technical Specifications

Supply Voltage	85–265 VAC / 24–36 VDC (Optional)
Remote Control Supply Voltage	2 x AA Alkaline Battery
Maximum Power Consumption	2.5–5 W (No Load–Full Load)
Mechanical Dimensions of the Device	715 mm x 154 mm x 98 mm (Width x Depth x Height)
Device Weight	3250 g (Display Panel) 135 g (Remote Control)

Communication Features

Communication	RS232 and CANBus
CAN Line Feature	Can adjust the parameters of the Rope Angle Limit Sensor device connected to the same CAN line
Parameter Settings	Parameter settings of the rope angle limit sensor can be done on the device

Description

The ELFATEK Digital Display Panel measures signals from load cells with high precision and displays them on a 6-digit LED screen. It is used for weight monitoring, limit control, and safety checks in crane and lifting systems. All parameters can be adjusted via remote control, and it can synchronize with other control units through CANBus communication.