elfatek
EN MAX 1202-S2

12 Button Crane Remote Control Set

The EN X, MID, ESX, and MAX designs are specially designed and produced by Elfatek Technology Inc. to provide ease of use. These models are commonly used in construction cranes, overhead cranes, and also in special applications.

The control body is resistant to impacts, collisions, and water in different climate conditions. It is designed to be used with gloves.

Product Features

Design

Start Button

Emergency Stop Button

Quick-Release Cover/Battery

Safety Key

I-Chip

Selector Key

Technical Specifications

Transmitter Technical Specifications

Model MAX
Number of Buttons 12
Maximum Extracted Power 36 mW
Supply Voltage 3 VDC
Operating Frequency 2.4 GHz ISM Band
Number of Channels 80
Operating Range 100 m
RF System Output Power 10 mW ERP (Internal Antenna)
Operating and Storage Temperature -20°C to +45°C - Optional (-40 °C to +85 °C)
Enclosure Protection Rating IP 65
Enclosure Material Polyamide
Button Diameter 20 mm
Battery 2xAA Alkaline Battery
Continuous Operation with Fully Charged Battery ≥ 240 hours
Operating Time After Low Battery Warning 30 minutes
12 Buttons (Including Battery) 0.440 kg

Receiver Technical Specifications

Model MAX
Maximum Extracted Power 10 W
Supply Voltage 48–110–220 VAC (Standard)
Optional Supply Voltages 15–35 VAC / 15–50 VDC (Optional)
Only one can be used 380 VAC (Optional)
Operating Frequency 2.4 GHz ISM Band
Number of Channels 80
Operating Range 100 m
Start Relay Response Time ≤ 65 ms
Command Relay Response Time ≤ 65 ms
Response Time for Passive Emergency Stop (EGM Passive) ≤ 70 ms
Operating and Storage Temperature -20°C to +45°C - Optional (-40 °C to +85 °C)
Enclosure Protection Rating IP 65
Enclosure Material Polyamide
Maximum Capacity of Control Relays 10A 250VAC
Maximum Capacity of Stop Relays 8A 250VAC
Weight (Including Box) 2.5 kg
Small Size (HxWxD) 235x150x120 mm
Medium Size (HxWxD) 320x170x120 mm
Large Size (HxWxD) 335x195x130 mm

Get a Quote

Other Products

Elfatek Techonology, Crane Remote Control, Crane Control
Malfunction Form